Knowledge Center

Home > Knowledge Center (Page 2)

Hydrodynamic behavior of the structure for a 10 MW turbine (Seakeeping) with BEM model and Study of platform movement minimization using Wadam (Salt Technologies) The objective of the study is to verify the suitability of the platform to support a 10 MW turbine with low accelerations...

19 diciembre, 2019

Definition of valves, pumps, etc. to carry out both anchoring and dismantling Study of the filling and emptying system of cell caisson type structures using rotary lobe pumps or by compressed air injection. Analysis of the sectorization, instrumentation and control system....

19 febrero, 2019

Platform scalability study. Dimensional adaptation of the structure to the bases. Use of naval stability models in all configurations 0,5MW Wind turbine configuration 2MW Wind turbine configuration 5MW Wind turbine configuration 10MW Wind turbine configuration 15MW Wind turbine configuration 20MW Wind turbine configuration    ...

19 abril, 2017

Structural calculation of the platform (integral caisson and caisson using precast elements) The objective is to justify the design of the foundation for offshore wind turbines, both structurally and constructively. It consists of the following sections: Definition of the structure Proposed construction process Structural justification    ...

19 marzo, 2017

CFD study of the hydrodynamic flow around the platform in order to minimize its resistance Analysis of different caisson configurations (special finishes, edges, changes of level …) with different angles of incidence that modify the flow to optimize its behavior and maritime stability  ...

19 septiembre, 2016

Alternatives study of the geometry of the caisson. The objective of the study is to design the optimal structural system for the distribution of loads and minimization of environmental actions.In addition, studying the optimum dimension and shape of the cells that make up the caisson so...

25 marzo, 2016

Model test campaign at a 1:20 scale carried out in the CCOB tank of the IH Cantabria to study the OWC oscillating water column system (IH Cantabria). Carrying out physical model tests, made out of steel sheets, necessary to calibrate a simplified numerical model that will...

19 enero, 2014

Numerical modeling of the hydrodynamic behavior of the platform from the laboratory data obtained in the tests (IHCantabria) CFD modeling for the determination of extreme loads in Ultimate Limit State.Study of wave-structure interaction, both in its two-dimensional version, IH-2VOF, and in the three-dimensional model IH-3VOF. ...

03 abril, 2012

Model test campaign at 1:50 scale of the triangular platform in the coastal wave tank of the laboratory of the Environmental Hydraulics Institute of Cantabria (IHCantabria) The objective of the tests is to determine the forces and moments acting on the foundation models, as well as...

10 febrero, 2012