Author: beridi

  • All
  • Corporate News
  • Knowledge Center

ARCHIME3 Kick-off meeting for Phase 1 Presentation and common review of the different tasks to be carried out and the objectives to be achieved within the first stage of the project. The companies participating in the meeting were: ECOREL UPM and IH Cantabria, responsible for the...

CFD modelling First tests of the platform using CFD models to obtain performance parameters such as viscous damping and added mass....

Beridi receives funding from CDTI Beridi receives 250k funding from CDTI to continue improving its patented technology for floating wind turbines....

Beridi gets granted from European Union Beridi gets granted a €2.4 M European Project for the installation of a real-scale prototype of their patented floating structure for offshore wind turbines....

Laboratory campaign for platform optimization New physical model testing campaign in the ECOREL UPM tank (Madrid), for the study of new configuration alternatives and optimization of hydrodynamic behavior parameters....

Numerical modeling of the hydrodynamic behavior of the platform from the laboratory data obtained in the tests (IHCantabria) CFD modeling for the determination of extreme loads in Ultimate Limit State.Study of wave-structure interaction, both in its two-dimensional version, IH-2VOF, and in the three-dimensional model IH-3VOF. ...

Test campaign at 1:50 scale of the triangular platform for 10 Mw turbines in the tank of the ECOREL-UPM laboratory of the School of Roads, Canals and Ports of Madrid The objective of the tests is the determination of the forces, pressures and moments acting on...

Stress analysis on the structure and dimensioning of the reinforcement for the 10 Mw turbine Estimation of the maximum values of the moments and stresses on the structure to dimension the amounts of reinforcement. Definition of the final geometry of the structure to undertake these efforts....

Study of the mooring system from a coupled analysis of the platform using Orcaflex Studies and definition of installation of anchors and lines (Salt Technologies) Combinations of loads based on existing regulations...

Hydrodynamic behavior of the structure for a 10 MW turbine (Seakeeping) with BEM model and Study of platform movement minimization using Wadam (Salt Technologies) The objective of the study is to verify the suitability of the platform to support a 10 MW turbine with low accelerations...